Alpha Calender Roll-Master is the name for Adkins fantastic range of continuous calender presses and this top of the range model has an impressive 1800 mm wide pressing capability and the ability to keep pace in even the most demanding production environments.
As with the other models in the Alpha Calender Roll-Master range the oil filled drum heating system provides superior heat distribution and image transfer with minimal power consumption. This means that producing long continuous production runs, where the first print identically matches the last print, is easily achievable.
Available in two drum diameters (420 mm or 600 mm) that can deliver pressing speeds of up to 5.0 m/min are achievable.
The Alpha Calender Roll-Master 2.0 is supplied as standard with 3 feed rollers and 3 take off rollers, with pneumatic air bars for ease of loading and unloading. This enables you to simultaneously run a protection paper, printed paper and textile to be printed, bonded or laminated and re-roll them again on the take off rollers.
The toughened glass front feeding table makes for ease and accuracy of loading, the placement of printed and flood printed papers and the alignment of cut panels onto roll printed papers.
Operators remain in full control via the simple digital control panel with speed and temperature controls, fully adjustable width and tension on all feed and take off rollers and a conveyer system for piece unloading to a collection bin. The emergency stop buttons and static discharge system ensures safety at all times.
Can be used with Roll-to-Roll transfer, Piece-to-Piece transfer and Piece-to-Roll transfer for applications such as soft signage, fashion, flags, bedding, curtains, tents, sportswear, floor coverings and personalised items.
Compliance: Manufactured and tested to comply with EC safety regulations. CE labelled.
Supplied with:
– 12 months warranty (machine and heating element)
– Instruction manual including full operating and safety instructions, electrical wiring diagrams, exploded diagram and parts list.
– Service and spare part support.
Requires: 3 Phase Neutral & Earth 45Kw (420 mm Drum) 58kW (600 mm Drum) electrical supply.
Ideal for use with bonding, thermal and cold transfer and sublimation.
